What is the right width for electric swing gates?

The gate opening should match your actual traffic requirement, not just the width of the gap. A single car requires a minimum clear opening of 2.7 metres; two cars passing comfortably need at least 5 metres. Most residential driveways in Surrey fall between 3 and 4 metres, which works well with a standard double gate split into two equal leaves. If the opening is wider than 5 metres, your installer will likely recommend sliding as a more structurally sound option, as very wide swing leaves put significant stress on the post foundations and motors.

Do electric swing gates require planning permission in Surrey?

In the majority of cases, no. Permitted development rights cover gates up to 2 metres in height that open inward and are not adjacent to a classified road. The limit drops to 1 metre for gates that front a highway. Listed buildings and conservation area properties require consent regardless of height. Surrey has a high concentration of planning designations: the Surrey Hills AONB, extensive Green Belt coverage, and conservation areas in every district town and dozens of villages. Your installer will flag any planning considerations at the site survey stage and can recommend a pre-application enquiry to the local authority where there is any doubt.

What is the right width for electric swing gates?

The gate opening should match your actual traffic requirement, not just the width of the gap. A single car requires a minimum clear opening of 2.7 metres; two cars passing comfortably need at least 5 metres. Most residential driveways in Surrey fall between 3 and 4 metres, which works well with a standard double gate split into two equal leaves. If the opening is wider than 5 metres, your installer will likely recommend sliding as a more structurally sound option, as very wide swing leaves put significant stress on the post foundations and motors.

Do electric swing gates require planning permission in Surrey?

In the majority of cases, no. Permitted development rights cover gates up to 2 metres in height that open inward and are not adjacent to a classified road. The limit drops to 1 metre for gates that front a highway. Listed buildings and conservation area properties require consent regardless of height. Surrey has a high concentration of planning designations: the Surrey Hills AONB, extensive Green Belt coverage, and conservation areas in every district town and dozens of villages. Your installer will flag any planning considerations at the site survey stage and can recommend a pre-application enquiry to the local authority where there is any doubt.

Vetted Installers in Camberley

Electric Swing Gates in Camberley

Surrey electric swing gates specialists covering Camberley. Site survey at no charge, written quotes, no obligation to proceed.

Electric Swing Gates specialists in Camberley, verified and active in Surrey

Up to three independent quotes, each with a free site survey

Insured, warranted, and commissioned to BS EN 12453 as standard

Highly rated by Surrey homeowners

Free Matching Service

Get Matched in Camberley

Up to 3 vetted installers will contact you within 24 hours

Minimum 50 Residential Installs

Every Camberley installer in our network specialises in gate installation and has a verified project history before receiving a single referral from us.

Site Survey Within the Week

Most installers covering Camberley can offer a free site survey slot within 7 days, with evening and Saturday appointments available.

Insured and Warranted

Public liability cover and written warranties on both the gate and the automation are required from every installer before we refer any Camberley enquiries.

Matched to Your Gate Type

We connect you with Camberley installers who have specific experience with electric swing gates, not a general list of whoever is available.

Electric Swing Gates in Camberley: What to Expect

Swing gates are the default choice on most Camberley residential properties, and for good reason. A pair of gates opening as you pull onto the driveway delivers a combination of visual presence and daily convenience that other gate types struggle to match. The format is well-established, the installer population that can execute it well is substantial, and the range of materials and motor configurations available gives it genuine flexibility across different property types and budgets.

The motor decision shapes the aesthetic almost as much as the gate itself. Underground motors sit in a chamber below the post, invisible when the gate is closed, and are the standard specification on premium Camberley properties where every detail of the entrance matters. Ram-arm motors mount on the face of the gate and post, visible from the property side, and are the practical choice on retrofit projects where post foundations do not allow excavation. Your installer will assess which is appropriate for your specific post condition and gate weight at the survey.

How Electric Swing Gates Installation Works in Camberley

Submit your Camberley enquiry with gate type, opening width, and approximate budget. We match you with up to three swing gate specialists covering your area.

Each installer visits the Camberley property, measures the opening, walks the full swing arc to confirm clearance, and checks pillar and foundation condition before recommending motor type.

You receive a written quote covering gate fabrication or supply, post foundations if new, motor installation (underground or ram-arm), safety photocells, and access control equipment.

Where new gates are being fabricated, allow 2 to 5 weeks for manufacture depending on material and design complexity before the installation date.

On site, post foundations are set or verified, underground motor chambers are excavated where specified, and electrical conduit is installed before any surface work is reinstated.

Gate leaves are hung and aligned, motors are fitted into chambers or onto post faces, safety photocells are positioned for full arc coverage, and all wiring is terminated at the control board.

The complete system is programmed and tested to BS EN 12453. Travel limits are set, force limits calibrated, all access devices paired, and the manual release demonstrated at handover.

How Much Do Electric Swing Gates Cost in Camberley?

Driveway gate prices in Camberley vary depending on the gate type, material, and level of automation. Below are typical costs from vetted installers in the Camberley area. All prices are in GBP and include full installation.

Gate Type	Price Range	Install Time	What is Included
Electric Swing Gates (Fully Installed) Covers gate fabrication or supply, post foundations, underground or ram-arm motors, two remote handsets, and BS EN 12453 compliant safety sensors. Underground motors and bespoke wrought iron designs sit toward the top of the range. The most widely installed gate type across Surrey.	£4,000 to £12,000	2 to 4 days	Gate + motor + posts + remotes

Electric Swing Gates (Fully Installed)£4,000 to £12,000

2 to 4 daysGate + motor + posts + remotes

What's Included in the Price

Free site survey with no obligation to proceed
Bespoke gate design and workshop fabrication
All groundwork, post foundations, and concrete work
Automation motor, control board, remotes, and safety sensors
Intercom, keypad, or proximity reader wiring where specified
Full BS EN 12453 commissioning, testing, and written handover

0% Finance Available

Most Surrey installers in our network offer 0% interest finance on gate installations. Spread the cost of your project over 6 to 36 months from as little as £99 per month, with nothing to pay upfront at many providers. Subject to status and approval.

From £99/month

Spread over 6 to 36 months at 0% APR representative

The cost of driveway gates in Camberley depends on several factors: the material (wood, steel, aluminium, or wrought iron), whether you want automation, the width of your driveway entrance, and any bespoke design requirements. Prices vary across Surrey depending on site conditions and specification, but the installers in our Camberley network are competitively priced for the quality of work they deliver. Every installer offers a free site survey so you can get an accurate, itemised quote before making any commitment.

Why Get Electric Swing Gates in Camberley Through Us?

Swing gate installers in our Camberley network understand the property types, plot sizes, and gradient conditions typical across this part of Surrey.

Underground and ram-arm motor options available with straightforward guidance on which suits your gate weight, post condition, and specification.

BS EN 12453 commissioning completed and documented on every installation before handover, with no exceptions.

Written warranties covering gate structure and automation system provided separately by every Camberley installer in our network.

Electric Swing Gates in Camberley: Common Questions

Inward is the standard and, in most cases, the only permitted option. UK highway regulations prohibit gates from opening over a public footpath or road, which rules out outward-opening designs for most residential properties. The exception is where the driveway slopes steeply downward from the road toward the house, making inward opening mechanically difficult. In those cases, installers typically use articulated hinge systems or higher-torque underground motors to manage the gradient rather than reversing the opening direction. Sloped driveways are common across Surrey, particularly in the North Downs and Surrey Hills areas.

What Homeowners Are Saying

“We had three quotes within a week of submitting the enquiry. The installer we chose fabricated a pair of bespoke powder-coated steel gates to match the existing railings, fitted underground motors, and installed a video intercom with smartphone access. The whole job was handled cleanly and the gates have been faultless since. Would not hesitate to recommend.”

Richard A.

Weybridge · Electric Sliding Gates

“After getting nowhere with a couple of local builders who were not really gate specialists, I used this service and was matched with someone who clearly knew what they were doing. They advised on the right motor for our heavy oak gates, sorted a minor hinge issue we had not noticed, and the automation has worked perfectly for over a year now.”

Caroline M.

Guildford · Gate Automation

Get Electric Swing Gates Quotes in Camberley

Submit your enquiry in under two minutes. We will match you with up to three vetted Camberley installers for free site surveys, written quotes, and no obligation at any stage.