Electric Sliding Gates
in Woking.

Most sliding gate enquiries in Woking start with a constraint rather than a preference. A driveway that is too short for swing leaves to clear without blocking the road. An approach that slopes downward from the pavement and defeats standard swing gate hinge geometry. An opening wide enough that swing gate leaves would put impractical leverage on the hinge posts. A sliding gate solves all three situations with the same mechanism: horizontal travel along the boundary, no arc clearance required, no swing space needed in front of the gate or behind it.

The two configurations in regular use are ground-track and cantilever. Ground-track is the standard on flat or near-flat sites: a concrete foundation carries the track channel, the gate runs on rollers within it, and the motor drives the gate through a rack fixed to the underside of the leaf. Cantilever systems suspend the gate above the surface from an overhead rail, removing the ground-level requirement entirely. They are specified for sites in Woking where the driveway gradient makes a level track impractical, where the surface has a finish that should not be interrupted by a track channel, or where the ground conditions would not support a conventional foundation.